Izdelki za oprema za park (21)

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling. minimum dimensions:Diameter m. 15,3 (50’3”) - Height m. 7,6 (25’) [min. m.6,6 (21’8”)] Maximum capacity:72/78 passengers (Adults / Children) Maximum passengers/hour:1200 passengers/hour (4 min. cycle) Power requirements:Total maximum power 35 kW (30 kW Lighting - 5 kW Motive Power)

Ferma parcheggio zincato tropical oro, tubo diam 40mm con staffe di fissaggio a terra, con piastra saldata per lucchetto, pieghevole. Dimensioni: lunghezza :4cm larghezza :55 cm altezza : cm 45 peso : 2 kg

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling. minimum dimensions:Diameter m. 11 (36’1”) – Height m.8.6 (28’3”) [Min. m 7,9 (25’11”)] Maximum capacity:70/76 passengers (Adults / Children) Maximum passengers/hour:1050 passengers/hour (4 min. cycle) Maximum Speed:5 RPM (adjustable electronically to lower values by the client) Power requirements:Total maximum power 32 kW (28 kW Lighting - 4 kW Motive Power)

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive. maximum dimensions:Width m. 10 (32’10”) – Depth m. 10 (32’10”) - High m 3,5 (11’6”) Maximum capacity:36 passengers (Adults/Children) Maximum passengers/hour:720 passengers/hour (3 min. cycle) Power requirements:23 kW (3 kW Led Lighting - 20 kW Motive Power)

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling. minimum dimensions:Diameter m. 5,5 (18’) - Height m 3,35 (11’) Maximum capacity:19/20 passengers (Adults / Children) Maximum passengers/hour:480 passengers/hour (2,5 min. cycle) Power requirements:Total maximum power 7,5 kW (6 kW Lighting - 1,5 kW Motive Power)

The dark-ride consist of enclosed pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail across "scaring" scene with animations and sound effects. Each car have a capacity of 4 passengers and is equipped with restraint lap-bars to hold passengers inside vehicles during operation. This Dark-Ride vehicle ìs designed to be operated on a single-level ride with flat surface.The vehicle consist of a painted steel chassis, surrounded by bumper profile, and painted fiberglass body. The driving unit consist of AC gear-motor connected to driving wheels "cllmbing" along the track. The electric motor is controlled by Frequency Drive programmed with pre-set operational speeds. The vehicle is supported by fours swivel castor wheels.

The dark-ride consist of enclosed pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail across "scaring" scene with animations and sound effects. Each car have a capacity of 2 passengers and is equipped with restraint lap-bars to hold passengers inside vehicles during operation.This Dark-Ride vehicle is designed to be operated on a multi-level. The vehicle consist of a painted steel chassis, surrounded by bumper profile, and painted fiberglass body. The driving unit consist of DC gear-motor connected to the rear axle's wheels. The vehicle is supported by front trolley and two rear wheels (inflated tyres).

The Swing Carousel consists of a rotating structure rising along a central column and supporting three rows of swinging chairs; 16 double seat chairs are located on the inner row for accommodation of one adult and one child. The whole structure is hot-dip galvanised, with exception of the central column and is covered by hand painted decorative fibreglass panels on which lighting is fixed. The swinging chairs and their supporting chains are made by stainless steel. The covering roof is made up by a flame-retardant canvas. The rotation is made by two self-braking AC motors on top and one AC motor at bottom of central column. All motors are controlled by frequency drives and the whole system is operated by PLCs. Static dimensions (park model):Diameter m. 11 (36’2”) - Height m. 9 (29’7”) Operational dimensions (park model):Diameter m.17 (56’) - Height m.11,8 (38’8”) Static dimensions (trailer mounted):Front m.15,2 (50’) – Side m.12 (39’5”) - Height m.10,2 (33’6”) Operational dimensions (trailer mounted):Front m.18 (59’) - Side m.17 (56’) - Height m.12,8 (42’) Maximum capacity:48+16 passengers (Adults + Children) Maximum passengers/hour:960 passengers/hour (4 min. cycle) Power requirements:46 kW (16 kW Led Lighting - 30 kW Motive Power)

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling. minimum dimensions:Diameter m. 8,5 (27’11”) - Height m 6,6 (21’8”) Maximum capacity:35/37 passengers (Adults / Children) Maximum passengers/hour:700 passengers/hour (3 min. cycle) Power requirements:Total maximum power 5 kW (2,5 kW Led Lighting - 2,5 kW Motive Power)

The track-ride consist of open pavilion where automatically operated vehicles (multi-passengers) runs along apposite rail. Each car have a capacity of 2 or 4 passengers.These vehicles is designed to be operated on a multi-level ride. The vehicle consist of a painted steel chassis. The driving unit consist of DC gear-motor connected to the rear axle's wheels.

The Galleon Race ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail, connected to a central rotor by radial arms (sweeps). The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. The ride moves by means of 1 self-braking A.C. gear-motor fixed to the central rotor and controlled by Frequency Drive. maximum dimensions:Width m. 11,2 (36’9”) – Depth m. 12,3 (40’4”) - High m 3,2 (10’6”) Maximum capacity:24/36 passengers (Adults/Children) Maximum passengers/hour:480 passengers/hour (3 min. cycle) Power requirements:27 kW (2 kW Led Lighting - 25 kW Motive Power)

Cestino verniciato per arredo urbano in acciaio, completo di staffa, palo e cestino, con viterie, tappo in pvc nero, da inghisare a terra. Dimensioni: lunghezza :26cm larghezza :35 cm altezza : cm 120 peso : 8kg

The Bumper-car pavilion consist of a delimited steel platform and a roof structure where electrically operated vehicles are individually operated by the passengers. Each car have a capacity of 2 passengers and is equipped with inflated rubber bumper ali around the perimeter. The power is supplied to the car through the steel pavement and an apposite ceiling steel net fixed to the roof structure (traditional power pick-up).The driving surface is delimited along the perimeter by a steel bumper structure and aluminium approaching footboard. Enclosure railing is also available. The whole structure id hot-dip galvanised and the foot-board is made out of aluminium anti-skid plate. The covering roof is made up by a fireproof canvas.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger Engine :DC Electric Motor 60-110V (25-50V Floor pick-up) Driving power:0,8 kW Lighting:0,3 kW Token capacity:15 N (3,3 Lbs) Tyre Pressure:1,8 bar Total weight:2,2 kN (480 Lbs) Empty

Go-karts are among the best-suited entertainment for young people, men and women, who like competing while driving single-seat vehicles without any special driving skills. The vehicles produced by Bertazzon were designed to be easy to operate, both on fixed tracks (concrete or asphalt) and mobile ones. These vehicles are equipped with a perimetral inflated rubber bumper, specially designed to reduce the impact between vehicles and with the guard-rail. Available both on "Bare body" version and with fibreglass body (Sport, Buggy, ...). Sitting places:1 Passenger (driver) Engine :4 Stroke (Honda) Driving power:4 kW (5.5 Hp) Fuel capacity:3,6 I Tyres:4.10 / 3.50 x 5 Brake:Disk (mechanical control) Speed:30 Km/h (18 mph) Total weight:1,6 kN (360 Lbs) Empty

Bertazzon's "Midi" bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of one Adult and one Child each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt. Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger (One Adult + one Child) Engine :DC Electric Motor 40-70V (25-50V Floor pick-up) Driving power:0,3 kW Lighting:0,05 kW Token capacity:1 Kg (2,2 Lbs) Tyre Pressure:1,8 bar Total weight:135 Kg (295 Lbs) Empty

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger Engine :DC Electric Motor 60-110V (25-50V Floor pick-up) Driving power:0,8 kW Lighting:0,3 kW Token capacity:15 N (3,3 Lbs) Tyre Pressure:1,8 bar Total weight:2,2 kN (480 Lbs) Empty

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger Engine :DC Electric Motor 60-110V (25-50V Floor pick-up) Driving power:0,8 kW Lighting:0,3 kW Token capacity:15 N (3,3 Lbs) Tyre Pressure:1,8 bar Total weight:2,2 kN (480 Lbs) Empty

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger Engine :DC Electric Motor 60-110V (25-50V Floor pick-up) Driving power:0,8 kW Lighting:0,3 kW Token capacity:15 N (3,3 Lbs) Tyre Pressure:1,8 bar Total weight:2,2 kN (480 Lbs) Empty

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. Ali cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger Engine :DC Electric Motor 40-70V (25-50V Floor pick-up) Driving power:0,3 kW Lighting:0,06 kW Token capacity:1 Kg (2,2 Lbs) Tyre Pressure:1,5 bar Total weight:85 Kg (190 Lbs) Empty

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. Ali cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt Low voltage motor is also available for "Floor power pick-up" installations. Sitting places:2 Passenger Engine :DC Electric Motor 40-70V (25-50V Floor pick-up) Driving power:0,3 kW Lighting:0,06 kW Token capacity:1 Kg (2,2 Lbs) Tyre Pressure:1,5 bar Total weight:85 Kg (190 Lbs) Empty